disk controller

The floppy disk controller returned inconsistent results in its registers.

软盘控制器返回与其寄存器中不一致的结果.

The present hard disk is a standard configuration of the personal computer, and becomes the core of storage medium gradually. But IDE interface controller used on the personal computer is difficult to use on other apparatus directly.

现在的硬盘已经是个人计算机的标准配置，并逐渐成为存储介质的中坚力量，但是个人计算机上使用的IDE接口控制器难以直接使用在其它设备上。

These control bytes are handled entirely by the disk controller circuits.

这些控制字节被磁盘控制电路完全管理.

Steering wheels adjustment control FDC Floppy Disk Controller

转向盘调节装置操纵件软盘驱动器控制装置

The unit is linked or interfaced to a microcomputer via a floppy disk controller.

软磁盘装置可经软磁盘控制器链接到或接口到微型计算机上.

Any other components, including monitors, floppy disk or hard disk controller, are additional components, to connect through the expansion slot.

其他的任何部件，包括显示器、软盘或硬盘控制器，都是附加部件，通过扩展槽进行相连。

Reinitializes the disk controller and determines the hard disk parameters.

重新初始化磁盘控制器并设置硬盘参数.

With using the high performance disk-group and I/ O controller carrier, and the zero delay format converting PMC card, the playback data rate of single channel can reach 512Mb/ s and meet the require of the system design.

采用高性能的磁盘阵列和I/O控制载板，同时结合定制化设计的零延时换序PMC卡，使得单通道数据回放速率可以达到512Mb/s，满足了系统的设计指标。

While accessing the hard disk , a disk controller reset was needed, but even that failed.

当访问硬盘时, 即使失败,仍须复位磁盘控制器.

The disk controller was chomping all day yesterday.

磁盘驱动器昨天坏了一整天.

Design of Solid State Disk Controller with SATA Interface

基于SATA接口的固态硬盘控制器设计

Because if the IDE interface reads and writes the hard disk, it needs operating system, driver, external bus and interface controller to work together.

因为这种IDE接口如果要对硬盘进行读写，需要操作系统、驱动程序、计算机外部总线以及接口控制器共同工作。

Further, NAND SSD would be considered fast storage, accessed via a block-oriented storage controller ( much higher I/ O rates but similar bandwidth to a spinning disk drive).

而且，NAND SSD被认为是快速存储、通过面向块的存储控制器进行存取（更高的I/O率，但类似旋转磁盘驱动带宽）。

The floppy disk controller reported an error that is not recognized by the floppy disk driver.

软盘控制器报告软盘驱动程序不能识别的错误.

Reinitializes the disk controller and determines the disk parameters.

重新初始化磁盘控制器,并确定硬盘参数.